公司简介   ǀ  新闻   ǀ  品牌   ǀ  联系我们

8526动态力传感器

  • 特征

      测量范围从 0 ... 100 N 到 0 ... 1 MN

      极其紧凑的设计

      用于静态和动态测量

      底部的三个螺纹孔便于安装,电缆适用于拖链应用

      防护等级 IP64

      相对非线性:≤ ±0.1 % F.S.

      标准化输出信号

      burster 自动校准TEDS功能 可选


  • 产品数据

    Model8526
    Measuring range

    0 … 100 N
    0 … 200 N
    0 … 500 N
    0 … 1 kN
    0 … 2 kN
    0 … 5 kN
    0 … 10 kN
    0 … 20 kN
    0 … 50 kN
    0 … 100 kN
    0 … 200 kN
    0 ... 500 kN
    0 ... 1 MN

    Direction of forceCompression
    StandardizationYes
    Signal output1 mV/V
    Protection classIP64
    Overload protectionNo
    Pull-plateNo
    Load introduction buttonYes
    Range of operating temperature-30 ... +80 °C
    Specific characteristics

    • Measuring ranges from 0 ... 100 N to 0 ... 1 MN
    • Extremely compact design
    • For static and dynamic measurements
    • Three threaded holes on bottom for easy mounting and cable suitable for drag chain application
    • Protection class IP64
    • Non-linearity from 0.1% F.S.
    • Standardized output signal
    • burster TEDS optionally available



  • 说明

    Thanks to its compact shape and three fixing holes on its underside, the 8526 compression load cell can be used in a variety of applications. With its wide choice of measuring ranges from 0 ... 100 N up to 0 ... 1 MN, it really can cover a wealth of measurement tasks, from the laboratory to use in heavy industry.

    The integral load button provides an easy and reliable means of applying the force to be measured. Angle errors in the load application with a deviation from the measurement axis of up to 3° have only a minor influence on the measurement signal. For ideal measurement accuracy, the load cell should be mounted on a surface that has been ground and has a hardness of at least 60 HRC.

    The model 8526 load cell is designed with an internal elastic membrane, to which strain gages are attached. When a compressive load is applied to the load cell, the membrane is elastically deformed and transfers its tension to the strain gages. These in turn respond with a proportional change in their ohmic resistance, which can be evaluated using a suitable instrumentation amplifier or display device.


  • 产品介绍和下载


  • 附件

  • 视频


上海盘卓自动化科技有限公司 | 地址:上海市松江区沈砖公路5666号A602室 | 公安备案号:31011702002799  |   Tel:021-57688021  |  Email:info@pandauto.com  |  沪ICP备12000819号  
nach