公司简介   ǀ  新闻   ǀ  品牌   ǀ  联系我们

9250

  • 特征

      可与任何品牌的传感器配合使用,满足您的测量需求,独立于制造商

      超快速按钮配置

      支持 TEDS 自动识别传感器

      通过总线控制器可扩展的现场总线接口

      结合现场总线控制器 9251 支持基于以太网的现场总线,例如 PROFINET、EtherCAT、EtherNet/lP

      多达 8 个仪表放大器可以级联到一个现场总线控制器

      完整的测量数据导出功能

      适用于力、压力、位移、转速和扭矩测量,包括组合测量

      通过按钮或 I/O 信号为每个 9250 放大器进行去皮设备

      每个放大器模块最多两个实时信号/限位开关

      通过 USB 端口使用 DigiVision PC 软件进行多功能配置

      测量精度高

      控制柜安装的节省空间设计

      可调截止频率


  • 产品数据

    Model9250
    Non-linearity< 0,005 % F.S.
    Sample rate14400 Meas./s.
    Type of sensor

    • Strain gage
    • Potentiometer
    • DC/DC
    • Incremental sensors
    InterfacesScrew terminal
    Sensor excitation

    Strain gage full bridge:

    • 2,5 V
    • 5 V
    • 10 V
    • configurable, short-circuit proof

    Potentiometer:

    • 5 V
    Protection classIP20
    Supply voltage

    • 11 ... 30 V DC
    • Galvanic separation
    • Overvoltage
    • Pole protection
    Specific characteristics

    • Ultra-fast pushbutton configuration
    • Non-linearity < 0,005 % F.S.
    • Outputs ±10 V, ±5V and 0 (4) - 20 mA
    • 6 wire technique
    • Automatic sensor recognition due to burster TEDS
    • Adjustable cut-off frequencies
    • Versatile configuration using DigiVision PC software via USB port



  • 说明

    The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters.

    The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets. A highly accurate precision amplifier performs the amplification of the sensor signal being applied. The latest microprocessor technology made a 24 bit AD conversion with high accuracy possible. The sensor excitation is performed by the amplifier module itself so that no additional voltage source is required. It can also be set in steps of 2.5 V, 5 V, 10 V using configuration software DigiVision. The maximum feed current of 40 mA permits parallel connection of several strain gages sensors, e.g. for the addition of measurement variables. Measurement errors brought about by varying line lengths or due to temperature fluctuations effecting the sensor cable are avoided by having probe lines measuring the actual feed voltage directly on site at the sensor itself (6 wire technology). The cut-off frequency of the amplifier can be switched between 10 Hz and 1 kHz


  • 产品介绍和下载


  • 附件

  • 视频


相关产品

上海盘卓自动化科技有限公司 | 地址:上海市松江区沈砖公路5666号A602室 | 公安备案号:31011702002799  |   Tel:021-57688021  |  Email:info@pandauto.com  |  沪ICP备12000819号  
nach